PartMaster  V14 will only run under Windows 7 , 8 and 10.


The PC may be a laptop or a desktop machine. The machine must conform to the following general specification.


The PC must have at least 250MB free hard disk space.


The PC must have a serial RS232 port or USB to serial converter if you need to send programs to a machine tool that is fitted with a RS232 port.


The PC must have at least 1GB RAM fitted.


The PC’s graphics must be capable of displaying at least 1024 x 768 resolution; it is recommended that it be capable of displaying 1200 x 800 resolution.


A  mouse or other compatible pointing device.


The software is protected from unauthorized duplication.


Running on a MAC under Windows Parallel is not supported – however many customers use it flawlessly.


If you are unsure about any of the about you should contact your PC supplier.